Streaming Service with Icecast: Difference between revisions

From Run Your Own
Jump to navigation Jump to search
(Created page with "Note: we will be using the <code>icecast-kh<code> fork that contains some extra stuff (FIXME: unpack stuff). == Installation == * Get the sources cd /usr/src")
 
 
(32 intermediate revisions by the same user not shown)
Line 1: Line 1:
Note: we will be using the <code>icecast-kh<code> fork that contains some extra stuff (FIXME: unpack stuff).
'''Note:''' we will be using the <code>icecast-kh</code> fork that contains [https://github.com/karlheyes/icecast-kh/blob/master/NEWS some extra stuff and features/fixes/improvements] that may eventually land in vanilla <code>icecast</code>.


== Installation ==
== Installation for a Simple Setup ==
=== Software ===
'''Note:''' At time of writing, <code>icecast-kh</code> suffers from [https://github.com/karlheyes/icecast-kh/issues/260 a small compilation problem with OpenSSL].
 
* Install dependencies (Debian)
apt install libxslt1-dev libogg-dev libvorbis-dev libtheora-dev libcurl4-openssl-dev
* Get the sources
* Get the sources
  cd /usr/src
  cd /usr/src
git clone https://github.com/karlheyes/icecast-kh
* Compile and install
cd icecast-kh
./configure --with-openssl
make
make install
=== Firewall ===
* Make sure you listen on 8000, adjust your <code>iptables</code>:
-A INPUT -p tcp -m tcp --dport 8000 -j ACCEPT
You can adjust to your liking, 8000 is the default for Icecast.
=== Basic Configuration ===
Simple setup with <code>icecast</code> accepting 4 sources, changing process ownership to <code>nobody:nogroup</code>, and running in a <code>chroot</code>.
* log files in chroot:
mkdir /usr/local/share/icecast/log
chown nobody:nogroup /usr/local/share/icecast/log
* <code>/usr/local/etc/icecast.xml</code>:
<pre>
  <icecast>
      <location>𓅣</location>
      <admin>top.cool@c_est.super.deluxe</admin>
 
      <limits>
          <clients>64</clients>
          <sources>4</sources>
          <queue-size>524288</queue-size>
          <client-timeout>30</client-timeout>
          <header-timeout>15</header-timeout>
          <source-timeout>10</source-timeout>
          <burst-size>65535</burst-size>
      </limits>
 
      <authentication>
          <source-password>hackme</source-password>
          <relay-password>hackme</relay-password>
          <admin-user>admin</admin-user>
          <admin-password>hackme</admin-password>
      </authentication>
 
      <hostname>stream.domain.tld</hostname>
 
      <listen-socket>
          <port>8000</port>
      </listen-socket>
 
      <fileserve>1</fileserve>
 
      <paths>
          <basedir>/usr/local/share/icecast</basedir>
          <logdir>/log</logdir>
          <webroot>/web</webroot>
          <adminroot>/admin</adminroot>
          <alias source="/" dest="/index.html"/>
      </paths>
 
      <logging>
          <accesslog>access.log</accesslog>
          <errorlog>error.log</errorlog>
          <loglevel>1</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
          <logsize>10000</logsize> <!-- Max size of a logfile -->
      </logging>
 
      <security>
          <chroot>1</chroot>
          <changeowner>
              <user>nobody</user>
              <group>nogroup</group>
          </changeowner>
      </security>
  </icecast>
</pre>
=== Service file and autostart (systemd) ===
* Create a <code>/etc/systemd/system/icecast.service</code> unit file:
<pre>
[Unit]
Description=Icecast
After=network.target
[Service]
Type=simple
ExecStart=/usr/local/bin/icecast -c /usr/local/etc/icecast.xml
ExecReload=/usr/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target
</pre>
* Enable the service on boot:
systemctl enable icecast
* Manage the service with
service icecast start
service icecast status
service icecast stop
== MOAR Configuration ==
With the previous section you will get something up and running, stable and all. It's a good starting point to tweak things further.
=== NGINX Reverse Proxy ===
At time of writing, reverse proxying for icecast is not really worth it. Will explain a bit more eventually.
=== TLS/SSL Support ===
It's possible to use existing X.509 certificates to provide HTTPS access to both listeners and sources. For this to work the server and intermediate certificates with the private key.
* merge <code>fullchain.pem</code> with <code>privkey.pem</code>
# official acme client
cat /etc/letsencrypt/live/domain.tld/fullchain.pem > /usr/local/share/icecast/icecast.pem
cat /etc/letsencrypt/live/domain.tld/privkey.pem >> /usr/local/share/icecast/icecast.pem
# acme.sh
cat /root/.acme.sh/domain.tld/fullchain.cer > /usr/local/share/icecast/icecast.pem
cat /root/.acme.sh/domain.tld/domain.tld.key >> /usr/local/share/icecast/icecast.pem
* Adjust <code>icecast.xml</code> config file with <code><ssl-certificate></code> and <code><ssl-allowed-ciphers></code>:
<pre>
      <paths>
          <basedir>/usr/local/share/icecast</basedir>
          <logdir>/log</logdir>
          <webroot>/web</webroot>
          <adminroot>/admin</adminroot>
          <ssl-certificate>/usr/local/share/icecast/icecast.pem</ssl-certificate>
          <ssl-allowed-ciphers>ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:  RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS</ssl-allowed-ciphers>
          <alias source="/" dest="/index.html"/>
      </paths>
</pre>
'''Note:''' If you have used the config file of this documentation, then icecast will be reachable both on <code>http://stream.domain.tld:8000</code> and <code>https://stream.domain.tld:port</code>. You may want to keep it like that as some clients (both for listening and emitting) do not support TLS/SSL. If you want enforce TLS/SSL, you can adjust your config file so that:
<pre>
    <listen-socket>
            <port>999</port>
            <ssl>1</ssl>
    </listen-socket>
</pre>
=== Moar Cores! ===
In <code>icecast-kh</code> it's possible to choose how many threads to use for processing clients. This should be based on the number of CPUs or cores. This can be adjusted in <code>icecast.xml</code> with the following line inside <code><limits></code>:
<workers>4</workers>
=== Relaying an External Stream (the lazy way) ===
This can be done simply by just pointing to the stream you want to relay. Careful though, you need to point to the remote server IP, not the domain. If you add <code><on-demand></code>, the stream will be relayed only if it is requested.
<pre>
    <relay>
        <server>10.10.10.10</server>
        <port>1234</port>
        <mount>/blabla.mp3</mount>
        <local-mount>/blabla.mp3</local-mount>
        <on-demand>1</on-demand>
        <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
    </relay>
</pre>
[[Category: Streaming]]

Latest revision as of 22:03, 17 July 2024

Note: we will be using the icecast-kh fork that contains some extra stuff and features/fixes/improvements that may eventually land in vanilla icecast.

Installation for a Simple Setup

Software

Note: At time of writing, icecast-kh suffers from a small compilation problem with OpenSSL.

  • Install dependencies (Debian)
apt install libxslt1-dev libogg-dev libvorbis-dev libtheora-dev libcurl4-openssl-dev
  • Get the sources
cd /usr/src
git clone https://github.com/karlheyes/icecast-kh
  • Compile and install
cd icecast-kh
./configure --with-openssl
make
make install

Firewall

  • Make sure you listen on 8000, adjust your iptables:
-A INPUT -p tcp -m tcp --dport 8000 -j ACCEPT

You can adjust to your liking, 8000 is the default for Icecast.

Basic Configuration

Simple setup with icecast accepting 4 sources, changing process ownership to nobody:nogroup, and running in a chroot.

  • log files in chroot:
mkdir /usr/local/share/icecast/log
chown nobody:nogroup /usr/local/share/icecast/log
  • /usr/local/etc/icecast.xml:
  <icecast>
      <location>𓅣</location>
      <admin>top.cool@c_est.super.deluxe</admin>
  
      <limits>
          <clients>64</clients>
          <sources>4</sources>
          <queue-size>524288</queue-size>
          <client-timeout>30</client-timeout>
          <header-timeout>15</header-timeout>
          <source-timeout>10</source-timeout>
          <burst-size>65535</burst-size>
      </limits>
  
      <authentication>
          <source-password>hackme</source-password>
          <relay-password>hackme</relay-password>
          <admin-user>admin</admin-user>
          <admin-password>hackme</admin-password>
      </authentication>
  
      <hostname>stream.domain.tld</hostname>
  
      <listen-socket>
          <port>8000</port>
      </listen-socket>
  
      <fileserve>1</fileserve>
  
      <paths>
          <basedir>/usr/local/share/icecast</basedir>
          <logdir>/log</logdir>
          <webroot>/web</webroot>
          <adminroot>/admin</adminroot>
          <alias source="/" dest="/index.html"/>
      </paths>
  
      <logging>
          <accesslog>access.log</accesslog>
          <errorlog>error.log</errorlog>
          <loglevel>1</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
          <logsize>10000</logsize> <!-- Max size of a logfile -->
       </logging>
  
      <security>
          <chroot>1</chroot>
          <changeowner>
              <user>nobody</user>
              <group>nogroup</group>
          </changeowner>
      </security>
  </icecast>

Service file and autostart (systemd)

  • Create a /etc/systemd/system/icecast.service unit file:
[Unit]
Description=Icecast
After=network.target

[Service]
Type=simple
ExecStart=/usr/local/bin/icecast -c /usr/local/etc/icecast.xml
ExecReload=/usr/bin/kill -HUP $MAINPID

[Install]
WantedBy=multi-user.target
  • Enable the service on boot:
systemctl enable icecast
  • Manage the service with
service icecast start
service icecast status
service icecast stop

MOAR Configuration

With the previous section you will get something up and running, stable and all. It's a good starting point to tweak things further.

NGINX Reverse Proxy

At time of writing, reverse proxying for icecast is not really worth it. Will explain a bit more eventually.

TLS/SSL Support

It's possible to use existing X.509 certificates to provide HTTPS access to both listeners and sources. For this to work the server and intermediate certificates with the private key.

  • merge fullchain.pem with privkey.pem
# official acme client
cat /etc/letsencrypt/live/domain.tld/fullchain.pem > /usr/local/share/icecast/icecast.pem
cat /etc/letsencrypt/live/domain.tld/privkey.pem >> /usr/local/share/icecast/icecast.pem
# acme.sh
cat /root/.acme.sh/domain.tld/fullchain.cer > /usr/local/share/icecast/icecast.pem
cat /root/.acme.sh/domain.tld/domain.tld.key >> /usr/local/share/icecast/icecast.pem
  • Adjust icecast.xml config file with <ssl-certificate> and <ssl-allowed-ciphers>:
      <paths>
          <basedir>/usr/local/share/icecast</basedir>
          <logdir>/log</logdir>
          <webroot>/web</webroot>
          <adminroot>/admin</adminroot>
          <ssl-certificate>/usr/local/share/icecast/icecast.pem</ssl-certificate>
          <ssl-allowed-ciphers>ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:  RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS</ssl-allowed-ciphers>
          <alias source="/" dest="/index.html"/>
      </paths>

Note: If you have used the config file of this documentation, then icecast will be reachable both on http://stream.domain.tld:8000 and https://stream.domain.tld:port. You may want to keep it like that as some clients (both for listening and emitting) do not support TLS/SSL. If you want enforce TLS/SSL, you can adjust your config file so that:

    <listen-socket>
            <port>999</port>
            <ssl>1</ssl>
    </listen-socket>

Moar Cores!

In icecast-kh it's possible to choose how many threads to use for processing clients. This should be based on the number of CPUs or cores. This can be adjusted in icecast.xml with the following line inside <limits>:

<workers>4</workers>

Relaying an External Stream (the lazy way)

This can be done simply by just pointing to the stream you want to relay. Careful though, you need to point to the remote server IP, not the domain. If you add <on-demand>, the stream will be relayed only if it is requested.

    <relay>
        <server>10.10.10.10</server>
        <port>1234</port>
        <mount>/blabla.mp3</mount>
        <local-mount>/blabla.mp3</local-mount>
        <on-demand>1</on-demand>
        <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
    </relay>